What is a Multi Client Wireless bridge you ask? Basically what this unit will do, is take any of your existing RJ45 wired LAN Devices and let them connect wirelessly to a wireless 802.11b/g Access point or wireless 802.11b/g Router.

What can be connected to this Wireless Bridge? Anything you want, including the following:

• Desktops with an RJ45 network interface (built onto the motherboard or network pci card, nic card
• Laptops with a built in RJ45 network connector or external pcmcia network card
• PDA systems with Network interface CF cards.
• Stand Alone network web cameras and camera servers such as the AXIS 2100 cameras with RJ45 interfaces
• Video Game systems such as Xbox Live, PS2, GameCube, and even the old Sega Dreamcast can all now become wireless with this device.

General Features:

 

Features	Benefits
High Speed Data Rate Up to 54Mbps	Capable of handling heavy data payloads such as MPEG video streaming
IEEE 802.11b/g Compliant	Fully Interoperable with IEEE 802.11b/IEEE802.11g Compliant
Point-to-point, Point-to-multipoint Wireless Connectivity	Let users transfer data between two buildings or multiple buildings
Plug and Play	No driver needed, easy and quick to connect your Ethernet device to Wireless
Power-over-Ethernet	Flexible Access Point locations and cost savings
WPA(TKIP/ Pre-share key) support	Powerful data security
Hide SSID	Avoids unallowable users sharing bandwidth, increases efficiency of the network
DHCP Client/ Server	Simplifies network administration
Web-based configuration	Helps administrators to remotely configure or manage the Multi-Client Bridge with web browser
WDS (Wireless Description System)	Make wireless AP and Bridge mode simultaneously as a wireless repeater
MAC address filtering (AP Mode)	Ensures secure network connection
Seamless Roaming	Allows users to travel between APs without losing their network connection

 

General
Data Transfer Rate	1,2,5.5,6,9,11,12,18,24,36,48,54 Mbps
Standards	IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u
Compatibility	IEEE 802.11g/ IEEE 802.11b compliant
Power Requirements	Power Supply: 90 to 240 VDC ± 10%(depend on different country) Device: 12 V/ 1A
Status LEDs	LAN:Link , WLAN:Link , Power:on/off
Regulation Certifications	FCC Part 15/UL, ETSI 300/328/CE

 

RF Information
Frequency Band	2.400~2.484 GHz
Media Access Protocol	Carrier sense multiple access with collision avoidance (CSMA/CA)
Modulation Technology	Orthogonal Frequency Division Multiplexing (OFDM) DBPSK @ 1Mbps DQPSK @2Mbps CCK @ 5.5 & 11Mbps BPSK @ 6 and 9 Mbps QPSK @ 12 and 18 Mbps 16-QAM @ 24 and 36 Mbps 64-QAM @ 48 and 54 Mbps
Operating Channels	11 for North America, 14 for Japan, 13 for Europe, 2 for Spain, 4 for France
Receive Sensitivity (Typical)	-94dBm @ 1Mbps -92dBm @ 6Mbps -83dBm @ 24Mbps -92dBm @ 2Mbps -90dBm @ 9Mbps -79dBm @ 36Mbps -89dBm @ 5.5Mbps -88dBm @ 12Mbps -74dBm @ 48Mbps -86dBm @ 11Mbps -86dBm @ 18Mbps -72dBm @ 54Mbps
Available transmit power (Depend on Different Countries’ Regulation)	21 ± 2dBm @1, 2, 5.5 and 11Mbps 20 ± 2dBm @6, 9, 12, 18Mbps 17 ± 2dBm @24, 36Mbps 16 ± 2dBm @48, 54Mbps
RF Connector	TNC Type (Female Reverse)

 

Network
Topology	Ad-Hoc, Infrastructure
Operation Mode	Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/ Repeater
Interface	One 10/100Mbps RJ-45 LAN Port
Security	· IEEE802.1x / RADIUS Client (EAP-MD5/TLS/TTLS) Support— AP Mode · WPA -- Wi-Fi Protected Access · PSK (Pre share key) with 64/ 128-bit WEP Key · EAP-MD5/TLS/ TTLS authenticator (AP Mode) support · TKIP · MAC address filtering (WLAN) · Hide SSID in beacons
IP Auto-configuration	DHCP client/ server
Management	Web-based configuration

 

Environment
Temperature Range	-10°C to 45°C (14°F to 113°F) - Operating -40°Cto 70°C (-40°F to 158°F) - Storage
Humidity (non-condensing)	5%~95% typical

 

Physical Specifications
Dimensions	125(L)mm * 108(W)mm * 31(H)mm 4.9 (L)in* 4.3(W)in * 1.2(H)in
Weight	350 g (0.8 lb.)